Blower Aechmea move

[Product Description]
Can be mounted on the ceiling
- Stylish design that blends in well with the interior
- 4-stage wind volume switching function (strong wind, rhythmic wind, weak wind, medium wind)
After turning off the power, the unit will initially operate at the airflow volume previously set.
- 30 degree swivel function ensures good air circulation
・Remote control possible (within 5m)
- Timer function (6h/12h)
When installing multiple Ekmea Moves, the interval between each one is
If the space is too narrow, it will be difficult to operate each unit individually using the remote control.
If you are using multiple units, we recommend that you use them 70cm to 100cm apart.
In this case, please operate the remote control from a distance of less than 150 cm and set it individually.

【specification】
Power supply voltage: 100~220V
Power consumption: 5W
Base: E26
Material: Body/button: ABS
Feather: PP
Internal oscillating parts: PC
Accessories: Main unit, instruction manual, remote control
*Remote control batteries sold separately (2 AAA batteries)
Dimensions: 160mm*160mm*188mm
Weight: 465g
Matte Black/Matte White
[One month's electricity bill]
12 hours of irradiation per day x 31 days = approx. 60 yen
(Calculated at 31 yen per kWh)

■ Wiring devices that can be installed
*Please use an E26 socket wiring device that is fixed to the ceiling.
Please use with an E26 socket wiring device and an open type fixture with the lamp facing downwards.
■Notes
*Please be careful not to overtighten, as damage to the nozzle is not covered by the warranty.
*This product cannot be installed in the following locations:
- Sealed or nearly sealed equipment (excluding equipment marked as conforming)
- Places with high humidity, places where water may splash, or places where condensation may occur
● Places exposed to direct sunlight or near fire or heat sources.
●Mounting fixtures other than E26
Insulation installation equipment
●Devices with motion sensors for incandescent bulbs
●Do not use with dimmer fixtures.
●Do not use in environments where the room temperature is above 30 degrees.
The motor inside can get too hot and break down easily.
●Please use the remote control within 5m.
■Failures caused by continuous 24-hour operation are not covered by the warranty.
Continuous operation for 24 hours makes the device more susceptible to breakdowns. Be sure to allow it to rest for 30 minutes every 12 hours.
If the unit has been operated continuously for 12 hours or more, allow it to rest for 30 minutes or more before restarting it.