[NEO AMATERAS LED 20W] Plant growth LED, solar LED, aquarium LED, terrarium, indoor solar LED, black body

Next day shipping (excluding weekends, holidays, and long holidays) is possible!!
[Differences from previous models]
- Product design incorporating lines The design has been updated by adding a continuous line from the heat dissipation fin to the resin part.
- The lid has been changed to a stone-like design, creating an impactful design that breaks the conventional wisdom of plant growth lights.
- Uses highly durable parts The parts inside the power supply have been changed to more durable ones.

[Body color] Black [Color temperature] Approximately 5900K
[Color] Silver [Color rendering index] High color rendering Ra97

Illuminance, photon flux density (at irradiation distance of 40 cm)
[Illuminance] 18050lux
[PPFD] 406μmol m-2 s-1
[Total luminous flux] 2098lm
[Lumen] 2098lm
[Base] E26
【 Base 】 E26
[Power consumption] 20W
【Power】 20W
[Rated life (h)] 30000 hours [Rated life] 30000hours
*The rated life is a design value and not a guaranteed value.

●Dimensions [Total length] 14cm
[External dimensions] 12cm
[Weight] 295g
[Rated input current (mA)] 159
[Rated voltage (V)] 100
[Indoor use] AC100V 50-60Hz
[Recommended irradiation distance] 40cm~150cm

● Electricity bill for one month: 12 hours of irradiation per day x 31 days = approximately 200 yen (calculated at 27 yen per kWh)

Achieves color rendering close to sunlight.
The plants and underwater scenery look amazingly beautiful.
The way plants grow also becomes similar to how they would grow under sunlight.

●Please read the following precautions before using this product. *Please be sure to read before purchasing.

●This product cannot be used with the following devices.
*This may cause damage or malfunction.

○ Never use this product in a light bulb fixture or circuit with a remote control.
○Do not use this product in devices with a dimming function (adjustable brightness).
(Including step dimmer devices) (Cannot be used even when lit at 100%)
Emergency lighting equipment, emergency exit lights, HID lamp (mercury lamp, etc.) equipment,
Never use this product in devices with motion sensors designed specifically for incandescent bulbs.
(In addition, depending on the type of equipment used, there may be cases where the product cannot be used due to dimensional, thermal or other conditions.)
○ Never use this product with insulation installation equipment (SB, SGI, SG type labeled equipment).
○Please be sure to use equipment that is compatible with the wattage of this product or higher.
(If the lamp is 20W, please check that the fixture supports 20W or more.
If it is not compatible, the lamp will fail.)
○Cannot be used with lighting fixtures with different sockets.
○ In sealed or nearly sealed appliances, the temperature rise is large,
Do not use this as it will shorten the lamp life. Use an open fixture.

●Precautions for use*Please be sure to check.

○Cannot be used outdoors (even in enclosed equipment).
○Do not use in places where water droplets may fall or where humidity is high.
○The way light spreads (light distribution) is different from that of a light bulb, so
Type of fixture (e.g. fixtures with lamps mounted sideways or at an angle)
Depending on the lighting conditions, proper light distribution and brightness may not be obtained.
Do not use the lamp in locations where the ambient temperature exceeds 40°C.
The recommended ambient temperature for use is (-5℃~40℃). It will light up even at temperatures below -5℃,
This product is not waterproof or low temperature resistant, so it cannot be used in environments where condensation occurs.
Use at the voltage indicated.
This may result in a shorter lifespan or failure to light up.
○LED light sources have variations in light color and brightness,
Please note that even products with the same model name may have different light colors and brightness.
○The lifespan is the time until the luminous flux drops to 70%. The indicated lifespan is the design lifespan.
We do not guarantee the lifespan of the product.
The LED chip will not break, but the power board may break depending on the usage conditions.
It may not light up.
Do not use the device near high temperature sources (stoves, gas ranges, etc.) or in humid locations. This may result in fire or electric shock.